This should not be overlooked.
Where it is measurement required to omit dimensions which have previously been recorded the easiest method is to write the word nil in the squaring column as building shown in the following example.
The next stage is transferring the squared dimensions to the abstract or transferring the items directly from the dimension sheet to the bill.Openings under the measured area examples shall pickenpdf be deducted.Number titles of david dimension Sheets.743 Lapped 100mm at jts and bedded.m (1:3) Hor.Those not exceeding 300mm girth shall be in linear meters Those not exceeding.10 square meter shall be enumerated Particulars of building the following shall be given.It is advisable to separate the trenches measurement to external and internal walls.Leveling and compacting trench bottoms Surface treatment including leveling and compacting This is done at the bottom of excavations to receive concrete.The description of Damp proof course must include particulars of materials used, thickness/gauge, number of layers and the nature of bedding (section G96 G97).00m Say 230mm wall.Quantities refers to the estimated amounts of labour and materials required in the execution of the various items of the work and together these items give the total requirements of the building contract.This dimension sheet is split into two identically ruled parts each consisting of four columns as follows.(1:2:4/20 mm apg) laid on ashes (m/s) 50m thick bed of ashes laid and consolidated to rec.The floors will be measured together with measurement the associated items such as reinforcements Section F16 and formwork section F19.
Walling (SMM section G) Walling can be of blocks, bricks, concrete, natural stones and other light materials crack recommended be the design team to be used for walling.
20 metres away from excavations david Trees and Hedges Cutting down small trees.e 600mm girth and grubbing up their roots Cutting down Michongoma hedges and grubbing up their roots.
Screws and plastic washers Square cutting around openings, raking cuttings, curved cuttings, valleys, hips and vertical angles shall be given in star linear meter separately.
For example: Concrete item is measured in cubic meter.
36 The measurement of areas of external walls will be followed by incidental labours, etc, such as rough cutting, eaves-filling, projecting courses etc.It is measured in square meters if it does not exceed 300mm thick, otherwise it is in cubic meters.24 Excavation in rock and in silt or running sand shall be given in cubic meters as extra over all kind of excavations irrespective of the depth.E.g pickenpdf Adjustment for blockwork are razor done when taking off the windows david door openings.Billed items are razor generally deemed to include.e.52 Trade bills In Trade bills, items are arranged in trade order under the main headings of the separate trades.3/.00.00.00.50.50.00 Hor.3 introduction When a person wants to build a house, he goes to an Architect or a Consulting Engineer and places his requirements before him.R (3 8 4) ceiling finishing 15 mm thick plaster to concrete ceiling in two coat 1st coat 12mm thick in cement, sand and line ( 1: 4: 5 2nd coast 2mm thick in cement sand and line putty (1: 1: 5) with wood floated.